Thursday 7 May 2015

HOW-TO: Power Slot's Hummer H1

HOW-TO: Upgrading Power Slot's Hummer H1


If I was to sum up Power Slot's Hummer H1 release it would be 'all show and no go'.  Power Slots 2007 release of the Hummer H1 in 1:32 scale caught the attention of many slot car fans, especially those into the RAID/rally scene.  These days, a good H1 is getting harder and harder to come by, 2 years back I started to extend my RAID line-up and one of Power Slot's Hummers was a must have for me.

  If you've ever seen one in the flesh you'll know just how large and heavy these slots are.  The H1 is over 80mm wide, 145mm long and ground clearance through the centre of the slot is over 10mm high!  The Baja 1000 model featured here weighs in at 153 grams, the Lisboa-Dakar wagon H1 hits the 180 gram mark!   By way of comparison, a contemporary Slot.it weights under 80 grams.

A couple of features on the H1 caught my eye straight off the bat, the H1 has a massive drop glide arm, she's 4WD (twin belt driven), all wheel suspension, massive ground clearance, rubber aerials, a high detail model and a very unique release.


This from Wikipedia; 'The Hummer H1 is a civilian off-road vehicle based on the M998 Humvee, which was created by AM General. The vehicle was produced from 1992 through 2006, and was the first of what became the Hummer line. It was initially known only as the "Hummer"; however, in 1999 in a joint venture between General Motors and AM General, GM began marketing the Hummer H2, which was built on a heavily modified GMC 2500HD chassis.

It was at this point that the original Hummer was given the H1 designation. For collectors, the most desirable model is the H1 Alpha, produced in the final model year of 2006. It had the most powerful engine and the best fuel mileage of the H1 vehicles. Overall, the H1 was a very limited production vehicle.'

So the price, well with a slot like this you're going to be lucky to get much change from $US100 if you can find one.  You'll get your little hands on it and you'll find all the features I've detailed above present, you'll smile as you remove it from its base and place it on your track and that's where the smiling will end.  Now I'll point out that my H1 is one of the earlier releases and from what I've read, Power Slot made some improvements (particularly with the rubber) as later models were released.

Let's be realistic, you have to expect that such a heavy and large slot will not be breaking your lap record but unfortunately the H1's problems are far greater than a high centre of gravity.  All wheels are seriously out of round, the rubber is so bad that it is impossible to 'true' and in my models case, the rear axle was seriously bent.  This slot moves down the track like three-legged dogs on roller skates!  The saying 'shake, rattle and roll' seriously applies to the H1.

What's worse is that the 4WD action and suspension are basically ineffective.  The bands on the 4WD are too loose and there is nothing more than a millimetre or two of travel offered by the suspension.  The combination of a high COG, heavy body and no magnetic chassis down-force, results in a car that's very difficult to drive around even the slightest corner at speed.  Typically I would just upgrade hubs/rubber and away I'd go but the H1's hubs and rubber are an unusual size, more like a Fly or Avant truck than a Ninco RAID car.

All these factors resulted in putting my H1 back into its box and storing it in the cupboard out of sight for close to a year, till now.  Recently I can across a company called Mitoos Racing Slot Lab out of Spain, they make an extensive range of high performance parts allowing you to upgrade and improve your slots performance.  Ok I'll be honest, I'm a sucker for their knobbly truck tyres and wondered if they would be a suitable match for my H1.

A few hours research on the net resulted in the ordering of some Mitoos M028 Raid hubs and MO17 Raid Traction rubber.  I also needed to upgrade the axles and the standard Power Slot glide is sorely inadequate for a slot of such magnitude.  While I was at it, I noticed that Mitoos also manufacture suspension for the H1, a full set was a must if my beast was to perform to its full potential on the track.

A patient wait for my parts followed by 20 minutes of component replacement and I was ready to test my Mitoos upgraded H1.  Well as you might expect, track performance, handling and physics improvements are a welcome improvement, gone is the 'Hummer Hop' my H1 experienced as it lumbered down the track.  The H1 is far more manageable to drive and an added bonus to she also runs much quieter around the track.

Now lets talk about the improvements to aesthetics, the new hub/rubber combo looks wicked, hopefully the photos do the new look H1 justice.  At first I thought I'd prime and spray the hubs a mat black but I'll be leaving the chrome as is, for now anyway.

The suspension upgrade worked a dream, my H1 now has active suspension that actually works.  Mitoos offers a few options for the Hummer and I installed the 3-way adjustable (soft, medium and hard) M163 Pro shocks at the rear and M150 standard non-adjustable shocks in the front end due to reduced clearance to the bonnet.  The photos below will give you an idea of how well they work.

The upgrade glide was a must and helps to keep the beast in the slot when cornering, hot glueing the motor is also a good move.  I decide to remove the 4WD system as it offers very little to the H1's off  road capabilities, I may acquire some after market 4WD components at a later date and reinstall the 4WD function to the H1.  The only other element I may have to change in the future would be the spare wheel/rubber at the rear of the H1, really to create the full effect this needs to match the fantastic look of the Mitoos hubs and knobbly rubber tyres.

The H1 is always going to be a hand-full on the track but now its smooth, more manageable and stunning to drive.  For every 25 slot cars I purchase I find that one of them has something unexpected that makes you want to run it for thousands of laps, the Power Slot Hummer is one of those slots...you just have to work a little harder to unearth the potential.


Find this useful, check-out ManicSlot's How-to page by clicking the below link for more useful slotting tips and tricks.

Display ManicSlot's How To Page

────────────────────────────────

Wednesday 15 April 2015

GALLERY: Scalextric Tyrrell 002

Scalextric Tyrrell 002
C3482A, Francois Cevert, 'Legends' F1 series

The Tyrrell 002 makes for another stunning classic F1 release from Scalextric in their newly introduced 'Legends' range.  Presentation on the track is fantastic, Scalextric have put a lot of effort into capturing the detail and their efforts are appreciated.  The large intakes in the front wing make the car look particularly unique and the blue elf livery looks great on the track.

Performance is also very pleasing with my model turning some fast and competitive laps straight from the box.  You'll be happy to know that Scalextric have fitted the Tyrrell with their small button magnet (just forward of the rear axle - see below photo) allowing the slot to drift at time when pushed through corners.  

I must apologise for the quality of the photography, my 7D is on the blink so these have been taken with my iPhone.  :)  The Tyrrell is limited to just 3000 units, availability will be short term so make sure you secure one if you have the means.

From Scalextric: 'The 1971 French Grand Prix took place for the first time at the brand new Paul Ricard circuit in the mountains outside Marseille. Jackie Stewart gained pole position from Clay Regazzoni, Jacky Ickx and Graham Hill.

From the start, Stewart streaked ahead, setting fastest lap on lap 2 and pulling out a 10-second lead by lap 7. It was a 1-2 success for the Tyrrells on a tricky circuit, the Ford engine providing extra power down the very long Mistral straight. Cevert, having qualified 7th, fought his way to a 2nd place finish behind team partner Stewart.'


Want to find out more about Scalextric slot cars?
Be our guest and CLICK HERE

────────────────────────────────

NEWS: Flyslot Brabham BT44

Flyslot Brabham BT44
Argentina 1975 GP, Martini Racing Team, C.Reuteman

FlySlot have just release their latest offering, Brabham's BT44 from 1975 and if the photos are anything to go by, she's going to be a cracker!  Fly and FlySlot have been releasing historic F1s for many years now and the BT44 is a welcome addition, its great to see FlySlot releasing an completely new model.  I think you'll agree that the Martini livery is absolutely striking.  Like all Flyslot classic F1s, the BT44 comes with front steering wheels, something I really like.

If initial sellout sales here in Australia are any indication, you'd be wise to place an order at your favourite slot shop if you want one.


From Wikipedia: 'The Brabham BT44 was a Formula One racing car designed by Gordon Murray, Brabham's chief designer. An update of the partially successful BT42 of 1973, the BT44 was a simple design with a standard Ford DFV/Hewland gearbox combination, but was very clean aerodynamically. Murray had an eye for clean lines, and the BT44 was particularly graceful. He was also a forward thinker, and tinkered with side skirts and airdams on the car, a precursor to ground effects aerodynamics.

Sponsorship came from Martini.  The 1974 season was successful for Brabham. Carlos Reutemann took 3 wins with the car, partnered by Carlos Pace who was able to string a series of promising results together. Brabham finished at a fighting fifth place in the Constructor's Championship after a closely fought season.'


Want to find out more about FlySlot slot cars?
Be our guest and CLICK HERE

────────────────────────────────

Saturday 11 April 2015

NEWS: NSR BMW Z4 GT3

NSR BMW Z4 GT3
1193AW "Test Car Silver TRIANG", AW King EVO3

NSR have released some impressive photos of their soon to be released BMW Z4 GT3.  The Z4 is a very popular GT3 model at the moment, Scaleauto set the ball rolling last year with Carrera following suit.  Along with NSR, Scalextric will also be releasing the Z4 this year as it's PCR ("Pro Chassis Ready") maiden release complete with Slot.it running gear.  That makes 4 manufactures competing for your Z4 dollar so plenty of options.

It's no surprise that the first NSR livery will be the silver 'Test Car' livery as is the norm with most NSR new model releases.  Hopefully we'll get a race livery next, (Studie AG would be great) although I won't be surprised to see another plain colour release such as red.


From NSR: 'The BMW Z4 is an innovative model with high tech components, highly performing on track still respecting the scale modellistic aspect.

The BMW Z4 comes in anglewinder setup. The motor is King EVO 21 which has 21400 rpm @ 12 Volts 350 gr/cm.'


Want to find out more about NSR slot cars?
Be our guest and CLICK HERE

────────────────────────────────